Please note, AS7352 and AS7343 are identical in function and constuction. In the documentation, AS7343 or AS7352 is sometimes used. In this case, the facts apply to both sensors, even if the reference is made to the identical name. 

The EVK software is located in the "setup" directory. Please install the driver and software before using the EVK hardware. 

All technical documents such as EVK manual and sensor data sheet as well as application notes for calibration and sensor control can be found in the 'documents' folder. Project and design files of the mechanical tools are stored in the 'Additional accessories' folder in case you need to adjust the optical interfaces or the mounting of the EVK.

Normally, the EVK has all calibration data for the sensor in the EEPROM. The sensor uses a Golden Device calibration matrix that takes into account the spectral behavior of the sensor and LED. Dark as offset and white were individually matched. The results were also stored on EEPROM. Use the files from the 'ex Calibration datas' directory as input and perform an individual adjustment if the data on the EEPROM has been lost. Further details can be found in the manuals.

