New automotive-grade magnetic position sensors from ams feature PSI5 interface Neue AS5172 Positionssensoren von ams bieten sichere Datenübertragung und Systemkostenreduzierungen durch PSI5 Interface
2017/10/10
New AS5172A/B systems-on-chip enable automotive OEMs to comply with stringent safety standards across a wide range of remote position sensing applications
German versionPremstaetten, Austria (10 October, 2017) -- ams (SIX: AMS), a leading worldwide supplier of high performance sensor solutions, today announced the launch of the AS5172A/B magnetic position sensors, which feature a two-wire PSI5 interface for fast and secure transmission of their precise rotary position measurements.
The new AS5172A and AS5172B system-on-chip (SoC) devices are 0° to 360° contactless rotary magnetic position sensors which provide absolute angle measurements in high 14-bit resolution. The sensors have been developed as SEooC devices according to the automotive safety standard ISO26262, and feature extensive on-chip self-diagnostic systems. This makes the AS5172A/B ideal for safety-critical automotive applications, enabling a vehicle system to meet the highest ASIL safety level requirements.
In addition, the PSI5 interface in the AS5172A/B parts conforms to the latest standards, as set by the PSI5 specification versions 1.3 and 2.1.
AEC-Q100 qualified, the AS5172A/B devices support many automotive remote position sensing applications including brake and gas pedal position sensing, throttle valve and tumble flaps, steering angle sensors, chassis ride height sensors, Exhaust Gas Recirculation (EGR) valves, and fuel-level measurement systems.
Based on Hall sensor technology, the AS5172A/B devices measure the orthogonal component of the flux density over a full-turn rotation and compensate for external stray magnetic fields with a robust architecture centered around a 14-bit (0.022° resolution) sensor array and analog front end.
The AS5172A/B can also be programmed to support a sub full-turn angular range of motion as small as 0° to 10°, to achieve the best resolution for the application.
The high sensitivity Hall sensor front ends also enable the devices to work with small, low cost target magnets and support a wide magnetic field input range of 10-90mT. Only a simple two-pole magnet rotating over the center of the package is required to provide a nearly instant indication of the magnet’s absolute angular position. The magnet may be placed above or below the device.
The AS5172A/B operate over a wide supply voltage range of 4V to 16.5V, and support up to +20V of overvoltage protection. In addition, the supply pins are protected against reverse polarity up to -18V. The AS5172A/B is also easily programmed over the device’s VDD pin via a single-wire UART-over-PSI5 interface, minimizing the number of pins on the application programming connector.
“The introduction of our AS5172A/B magnetic angle position sensors reflects ams’ continued efforts to support the evolving interface and safety requirements of our automotive customers,” said Thomas Mueller, Director of Marketing for position sensors at ams. “With their PSI5 interfaces, and robust embedded self-diagnostics, the AS5172A/B are the perfect solution for enabling OEMs to achieve the highest in ASIL safety level compliance in remote angle position sensing applications.”
The AS5172 is available in a TSSOP14 package (AS5172B) and in an SIP package (AS5172A). The SIP package (System in Package) integrates the AS5172 sensor die together with the decoupling capacitors to yield improved ESD and EMC performance, eliminating the need for a PCB, and reducing overall system sensor costs. The AS5172A and AS5172B operate over a -40°C to 125°C and -40°C to 150°C temperature range, respectively.
The AS5172A/B magnetic position sensors are available immediately in production volumes. Unit pricing is $3.28 (AS5172A) or $2.69 (AS5172B) in order quantities of 1,000.
Evaluation boards for the AS5172A/B are available from the ams ICdirect online store. For sample requests and for more technical information, please go to AS5172A/B.
Premstätten, Österreich (10. Oktober 2017) - Die ams AG (SIX: AMS), ein führender Anbieter von hochwertigen Sensor- und analogen IC-Lösungen, hat heute die neuen Positionssensoren AS5172A/B vorgestellt. Sie ergänzen die Produktfamilie der ams AS517xx Serie und können hohe Anforderungen an die funktionale Sicherheit gemäß ISO 26262 erfüllen. Beide Varianten liefern ein digitales, gesichertes 12 bit Ausgangssignal über das PSI5 Zwei-Draht Interface. Beide Bausteine unterstützt die PSI5 Protokolle 1.3 und 2.1.
Die neuen AS5172A/B system-on-chip (SOC) ICs sind kontaktlose, komplett auf einem Chip integrierte magnetische Positionssensoren. Ein einfacher zweipoliger Magnet wird über oder unter dem IC platziert und der Baustein liefert dessen absolute Winkelposition über einen Bereich von 360°.
Die AS5172A/B Sensoren wurden gemäß des ISO 26262 Standards und des dort spezifizierten SEooC (Safety Element out of Context) entwickelt. Eine Vielzahl von Diagnosefunktionen im Sensorbaustein überwacht die Richtigkeit der ermittelten Messgröße. In sicherheitsrelevanten Automobilanwendungen können dadurch die höchstmöglichen Sicherheitsanforderungen erfüllt werden.
Die AS5172A/B-Sensoren sind AEC-Q100-qualifiziert. Ihre hohe 12 bit Auflösung am Ausgang gewährleistet präzise Messungen. Durch die hohe interne Auflösung von 14 bit kann der Baustein so programmiert werden dass eine Magnetdrehung von 10° bereits den vollen Hub des Ausgangssignals ergibt. Die Sensoren sind damit optimal für den Einsatz in Anwendungsbereichen wie Chassis Höhenstands-Sensor, Brems-, Gas- und Drosselklappenpositionserkennung, Gangschaltung, elektronische Servolenkung oder Abgasrückführung geeignet.
Basierend auf der Hall-Sensor Technik kommt bei den AS5172A/B ICs ein differenzielles Messprinzip zum Einsatz. Dieses Prinzip macht die Sensoren gegen magnetische Streufelder resistent. Solche Streufelder treten insbesondere in elektrifizierten Fahrzeugen (EV, HEV, PHEV) und bei großen Elektromotoren wie z.B. in der Servolenkung auf. Die ams Technologie ermöglicht eine präzise Messung unbeeinflusst von diesen Störungen.
Die hohe Empfindlichkeit des Hall-Sensor-Front-Ends der AS5172A/B Bausteine unterstützt einen großen Messwertbereich der Magnetflussdichte von 10-90 mT und gewährleistet damit die Verwendung von kleinen und kostengünstigen Gebermagneten.
Die AS5172A/B ICs arbeiten in einem Stromversorgungsbereich von 4 bis 16,5V. Die Versorgungs- und Ausgangspins sind gegen Überspannungen bis zu +20V geschützt. Der Versorgungsanschluss bietet zusätzlich Verpolungsschutz bis zu -18V. Die ICs können leicht über den Versorgungspin mit dem UART Protokoll programmiert werden.
“Die Einführung der magnetischen Positionssensoren AS5172A/B zeigt das kontinuierliche Bestre-ben von ams, die Anforderungen unserer Kunden hinsichtlich Sicherheit und niedriger Systemkosten unterstützen”, so Thomas Müller, Marketing Direktor Positionssensoren bei ams. “Mit der PSI5-Schnittstelle und den Diagnosefunktionen sind die AS5172A/B-Sensoren die perfekte Lösung für Automobilzulieferer um die höchsten ASIL-Sicherheitsanforderungen in verschiedenen Anwendungsbereichen erfüllen.”
Die AS5172A/B Sensoren sind im TSSOP14 Gehäuse (AS5172B) oder in einem SIP (System in Package)- Gehäuse (AS5172A) verfügbar. Die SIP-Variante beinhaltet den AS5172 Sensor und zwei Kondensatoren. Die SIP Technologie ermöglicht das Bestehen von System- ESD und EMV Tests auf Komponentenebene und damit Moduldesigns ohne zusätzliche Leiterplatte. Die AS5172A/B Sensoren arbeiten in Temperaturbereichen von -40°C bis 125°C (A) bzw -40°C bis 150°C (B).
Die magnetischen Positionssensoren AS5172A/B sind ab sofort in Produktionsmengen verfügbar. Der Stückpreis beträgt $3,28 (AS5172A) bzw $2,69 (AS5172B) bei Bestellmengen von 1.000 Stück.
Evaluation-Boards sind im ams-Onlineshop IC-direct verfügbar. Musteranforderungen und weitere technische Informationen finden Sie auf AS5172A/B.