ams AS8510 Analog Front-End

ams AS8510 Analog Front-End
Longevity January 2031
×
Longevity January 2031

品目

The AS8510 data acquisition front-end IC is a virtually offset free, low noise, 2-channel measurement device. It is tailored to accurately measure battery current from mA range up to kA range in combination with a 100 µOhm shunt resistor connected in series with the battery rail. Through the second measurement channel it enables capture of either battery voltage synchronous with the current or to measure the analog output of an internal or external temperature sensor.
データシート
AS8510 Data acquisition device for battery sensors
英語
ダウンロード
選択と注文
お問い合わせ 長寿命 サポート

詳細

特徴

  • First 16-bit dual ADC and PGA data acquisition ASSP with zero offset as a flexible sensor interface
  • Offset <1 LSB
  • Noise <1 LSB@1kHz, 1 Sigma

利点

  • Highest accuracy dual ADC for signal conditioning up to 4kHz
  • Flexible concept enables short time to market in evolving field of battery management
  • Full AEC-Q100 conformance

パラメーター

Resolution
16 bit
Automotive qualified
AEC-Q100
Current consumption
典型
3 mA
Standby current
40 µA
Package
SSOP20
Operating ambient temperature
最小
-40 °C
最大
125 °C
Package dimension
l 典型
7.2 mm
w 典型
7.8 mm
h 典型
2 mm
Supply voltage
最小
3.3 V
Function
current sensing

アプリケーション分野

産業 ロボティクス
自動車とモビリティ
バッテリマネジメント システム

注文コード

ダウンロード

データシート

AS8510 Data acquisition device for battery sensors

Datasheet
英語
ドイツ語
中国語
日本語

技術資料

環境関連文書

画像

ソフトウェア

関連のボード、キット、アクセサリ

ams AS8510_DEM_RB_COPPERSHUNT Demonstrator board

This Copper-Shunt based current sensor demo utilizes the AS8510 for current measurement and thermal-coefficient compensation. It is intended for a current range of ~40A operation and 60A maximum. Two measurement paths are provided. The left one uses the AS8510’s internal temperature sensor and the right one uses a fine copper meander trace to sense temperature.
詳細とデータシート

ams AS8510_DEM_SN Demonstrator kit

The AS8510 Demo Kit for AS8510 data acquisition front-end IC allows easy evaluation of the AS8510 features. Its USB connector allows easy access to all the chips features via a user friendly graphical PC interface. The GUI is supplied with the evaluation board and can be used to plot measured data as well as to access all the device registers and evaluate special settings. Key Features: - User friendly graphical PC interface - Easy implemenation in your own software (for example to do lab measurements in Labview) possible
詳細とデータシート

ams AS8510_REF_RB_ARDUINOSHIELD Reference design board

The AS8510 Arduino Shield Reference Design is an add-on to the very popular Arduino Series of µC development boards. The reference design allows to measure current and voltage via the AS8510 A/D IC and to use the measured data in any Arduino sketch. Schematic and layout are available as download with no restrictions. Libraries to interface to the Arduino IDE as well as example code can be downloaded for easy setup of this board. For use of this AS8510 Arduino reference design an Arduino Uno (or similar) host board is required: http://arduino.cc/en/Main/ArduinoBoardUno
詳細とデータシート

ams USB-BOARD_DEM_AC Demonstrator accessory

The USB Interface Board enables communication between the Copper-Shunt Demo and PC. The kit consists of the dual layer PCB USB Interface Board and a HDMI Type-D to Type-C Cable which is used to connect demo board.
詳細とデータシート

製品選択ツール

適切な製品を見つけてください。
製品選択ツール

その他 バッテリー管理

車載バッテリーモニタリング向けの高性能なパワーマネジメントソリューションです。

もっと見る バッテリー管理