カメラの強化

TCS3530 is an ultra-sensitive color sensor that matches the response of the human eye to visible light. The sensor’s highly accurate measurements of chromaticity and illuminance support superior automatic white balancing in cameras, as well as sophisticated display color management. Fully integrated optical assembly with built-in diffuser backed by end-of-line calibration simplifies manufacturers’ production processes and optical designs.

The TCS3448 is a 14-channel highly versatile, multi-purpose spectral light sensor. It is optimized to sense spectral components of ambient light in the visible range. Such spectral information is used for camera enhancement (CCT, AWB, exposure time). The spectral response is defined by individual channels covering approximately 380 nm to 1000 nm with 11 channels centered in the visible spectrum (VIS), plus one near-infrared (NIR) and a clear channel. Applications can be assisted to allow classification of ambient light and an integrated flicker detection channel that can automatically flag ambient light flicker at 50/60 Hz as well as buffer data for externally calculating other flicker frequencies. TCS3448 integrates high-precision optical interference filters directly deposited on photodiodes which are embedded in CMOS silicon. A built-in aperture controls the light entering the sensor array to increase accuracy. A programmable digital GPIO and LED driver enable light source and trigger/sync control. Device control and spectral data access is implemented through a serial I²C 1.2 V/1.8 V interface. The device is available in an ultra-low profile package with dimensions of 3.1 mm x 2 mm x 1 mm.

TSL2585 is a mini size ambient light sensor with UVA and light flicker detection, comes in a very low-profile and small footprint L2.0mm x W1.0mm x H0.35mm 6-pin OLGA package, perfectly fits wearable and mobile phone applications which are usually very space and height constrained.The high sensitivity enables the device to work behind a low transmissivity covering glass providing an accurate ALS detection. In addition, TSL2585 has a special edge-located photodiode placement which allows for a narrow bezel design down to 0.4mm width when the device is placed very close to the product edge. Fulfilling requirements of today's industrial design of designing bezel-less products for a good looking appearance.

The TMF8829 is a direct time-of-flight (dToF) sensor with configurable resolution of 8x8, 16x16, 32x32 & 48x32. The device is based on SPAD, TDC, and histogram technology and achieves a detection range of up to 11000 mm with an 80° field of view. All processing of the raw data is performed on-chip, and the TMF8829 provides distance information along with confidence values, signal amplitude, and ambient light on its interface. Internally, the TMF8829 uses dToF histograms and peak detection, and therefore, it is highly tolerant to smudges on the cover glass. Additionally, the TMF8829 can handle multiple objects per depth point simultaneously without degrading accuracy. It reports the distance of all depth points with a resolution of 0.25 mm. The device uses an I3C (I²C compatible) communication interface and a fully featured SPI interface for control and raw data streaming. A VBUS supply pin allows operation of the I²C/I3C or SPI with 1.2V, 1.8V, or 3V I/O supplies. Raw data streaming, including all algorithm peak detection results, allows further processing on the host for “AI-enabled” applications. The TMF8829 is a fully contained optical module measuring only 5.7 mm x 2.9 mm x 1.5 mm. Watch the TMF8829 product overview video to discover more TMF8829 Overview Video