詳細
特徴
- I/Q-Signal demodulation
- Up to 10 independent measurement lines possible (10 SEN lines)
- VAR&FIX_SEN function to avoid parasitic influences from cable and PCB
- Designed according functional safety standard
- AEC-Q100 Grade 1 qualified
利点
- Accurate capacitive measurement (seperation of resistive and capacitive information)
- Higher durability and lower system costs
- Enabler for safety critical applications
- Suitable for automotive applications
パラメーター
System sensitivity
80
fF/LSB
Output resolution
14 Bit (accumulated)
Sensing channels
10
Supply voltage
典型
5
V
Package
SSOP24
Automotive qualified
AEC-Q100
Shielding possibility
for cable and PCB
Operating ambient temperature
最小
-40
°C
最大
125
°C
Diagnostic
Error monitoring
Function
human presence detection
fluid level / quality sensing
Package dimension
l
典型
8.2
mm
w
典型
1.86
mm
h
典型
7.8
mm
注文情報
| 製品タイプ | 品目 | 注文コード | 在庫状況 |
|---|---|---|---|
| AS8579-ASSM | SSOP24 Tape & Reel 500 pcs/reel | Q65114A1245 | フル生産 |
| AS8579-ASST | SSOP24 Tape & Reel 2000 pcs/reel | Q65114A1244 | フル生産 |
ダウンロード
関連のボード、キット、アクセサリ
ams SD4Y-PROGRAMMER_EVM_AC Evaluation accessory
The SD4Y Programmer is an in-system programming tool which is applicable for production environment. The SD4Y programmer supports: digital writing and reading; OTP programming and analog read back for the OTP verification. Additional the SD4Y programmer can use the AMS programming boards.
The GUI and the Labview source code are available. Additional code samples for C; C++ and C# are available.
Download latest software (UProg_SW_package_2v0.zip,
264MB)
ams USB-I-P-BOX_EVM_AC Evaluation accessory
The USB Interface & Programmer Box is an universal evaluation tool for magnetic position sensors with I2C or SPI interface. It comes with a 10-way cable to connect to a supported product on an existing board. The I2C or SPI wires are used for the communication (3.3V mode) and additionally the sensor can be powered from the USB I&P Box. By using the USB I&P Box Software, it is possible to read out the sensor data, write a configuration and to permanently program a configuration.
Hardware and Software requirements: PC with Windows 7 or later and a USB-A port
ams AS8579_TS_EVM_DB Evaluation kit
The Evaluation Kit is designed to test and evaluate the features of AS8579 capacitive sensor. The Evaluation Kit includes the I&P-Box (Programmer), evaluation pcb with sensor IC, a cable and a USB-stick with all necessary software.
ams AS8579_SS_EVM_AB Evaluation board
The Adapter Board is designed for first evaluation of AS8579 capacitive sensors features and benefits. The PCB is equipped with all basic necessary components for easy plug'n'play evaluation. For communication and configuration of Sensor the adapter board can be connected either to an external microcontroller or to the USB I&P Box.
製品選択ツール
適切な製品を見つけてください。
その他 静電容量センサ
ams OSRAMの高精度な静電容量センサは、安定して正確に人体の存在を感知します。