ams AS5851B 数字X射线平板读取IC

品目

The AS5851B is a 16-bit, 256-channel low-noise charge-to-digital converter designed for use in digital X-ray systems. The high degree of programmability enables system performance optimization in a wide range of applications. The combination of fast speed, low noise and low power consumption maximizes the image quality and minimizes patient dose, exposure whilst improving the time to market.
Each channel front-end consists of a charge sensitive amplifier (CSA) and a correlated double sampler (CDS), that removes offset and flicker noise from the signal, which is then converted to digital. A fast and reliable LVDS interface transmits the output digital data off-chip. Built-in diagnostic functionalities enable to locate the source of errors in the signal chain from the detector to the data acquisition system. Voltage references and a temperature sensor are included on the chip. An SPI interface allows easy programming of the device parameters.
Two different power modes allow the user to minimize the current consumption for the chosen speed. Line times of 40 and 80 μs require as little as 1.6 and 1.1 mW per channel respectively. Additionally, it is possible to add together the charges in pairs of adjacent channels; with this binning, the fastest achievable line time is 20 μs.

詳細

特徴

  • Line times down to 40 µs
  • Binning mode (half the number of effective channels) for faster readout speed down to 20 µs
  • Selectable parameters: input charge range, holes or electrons polarity, detector timing, low-pass filter time constant and line time
  • Up to three different internal charge pump cycles for offset adjusting, signal emulation and switch charge injection compensation
  • Two power modes in addition to sleep and full power-down modes
  • Correlated Double Sampling for offset subtraction with programmable time constant

利点

  • Flexible programming options to optimize for application needs
  • Suitable to a wide range of detector sizes, supporting line capacitances up to 200 pF
  • Best-in-class figure of merit for noise, power consumption and speed
  • High-speed for dynamic applications
  • Ultra-low power for portable applications
  • Low-noise for great image quality
  • Accurate temperature feedback
  • Chip-on-flex packaging suitable to ACF bonding on the detector side and to a low-cost standard connector on the PCB side

パラメーター

Channels
input
256
Integration time
最小
40 µs
Input related noise
典型
500
Power consumption per channel
最小
1.6 mW
Resolution
16 bit
Package
chip-on-flex (ACF bonding + standard connector)
Function
x-ray sensing

ダウンロード

データシート

Short datasheet

技術資料

環境関連文書