세부 정보
주문 코드
| 제품 유형 | 설명 | 주문 번호 | 재고 여부 |
|---|---|---|---|
| AS8510-ASSM | 20-pin SSOP Tape and reel (500 pcs) | Q65114A0684 | |
| AS8510-ASSP | 20-pin SSOP Tape and reel (2000 pcs) | Q65114A0683 |
다운로드
데이터시트
Datasheet
기술 문서
Factsheet
환경 문서
Material declaration form
Material declaration form
Material declaration form
Material declaration form
RoHS certificate
이미지
Images
Block diagram
소프트웨어
Evaluation software
Evaluation software
관련 보드, 키트 & 액세서리
ams AS8510_DEM_RB_COPPERSHUNT Demonstrator board
This Copper-Shunt based current sensor demo utilizes the AS8510 for current measurement and thermal-coefficient compensation. It is intended for a current range of ~40A operation and 60A maximum. Two measurement paths are provided. The left one uses the AS8510’s internal temperature sensor and the right one uses a fine copper meander trace to sense temperature.
ams AS8510_DEM_SN Demonstrator kit
The AS8510 Demo Kit for AS8510 data acquisition front-end IC allows easy evaluation of the AS8510 features. Its USB connector allows easy access to all the chips features via a user friendly graphical PC interface. The GUI is supplied with the evaluation board and can be used to plot measured data as well as to access all the device registers and evaluate special settings.
Key Features:
- User friendly graphical PC interface
- Easy implemenation in your own software (for example to do lab measurements in Labview) possible
ams AS8510_REF_RB_ARDUINOSHIELD Reference design board
The AS8510 Arduino Shield Reference Design is an add-on to the very popular Arduino Series of µC development boards. The reference design allows to measure current and voltage via the AS8510 A/D IC and to use the measured data in any Arduino sketch. Schematic and layout are available as download with no restrictions. Libraries to interface to the Arduino IDE as well as example code can be downloaded for easy setup of this board.
For use of this AS8510 Arduino reference design an Arduino Uno (or similar) host board is required: http://arduino.cc/en/Main/ArduinoBoardUno
ams USB-BOARD_DEM_AC Demonstrator accessory
The USB Interface Board enables communication between the Copper-Shunt Demo and PC.
The kit consists of the dual layer PCB USB Interface Board and a HDMI Type-D to Type-C Cable which is used to connect demo board.
제품 선택기
원하는 제품을 찾으세요.
자세히 배터리 관리
자동차 배터리 모니터링을 위한 고성능 전원 관리 솔루션.