스마트 표면

Product status: Pre-Production AS1163B is a mixed signal silicon device optimized for automotive dynamic lighting applications (interior, exterior, smart surface etc.). The basic purpose of AS1163B is to drive 6 LEDs organized in 2 channel triplets (RGB) or simply 6 single-color LEDs with an independent PWM dimming dynamic range up to 16 bits. AS1163B is often addressed with a different name: “SAID2”, an acronym which stands for Stand-Alone Intelligent Driver with 2 RGB triplets. A daisy chain configuration of multiple AS1163B devices will enable cost effective implementation of complex dynamic lighting effects. AS1163B supports single layer slim PCB designs.The communication protocol supported by AS1163B (OSP: Open System Protocol) is fully compatible with the ams OSRAM OSIRE E3731i. AS1163B will support additional features such as I²C gateway, parallel connection, power-rail feedback, analog readout. Each AS1163B device in the chain will be usable by the MCU to read and write an external I²C device, e.g. EEPROM, temperature sensor, Ambient Light Sensor.

Product status: Pre-Production AS1163 is a mixed signal silicon device optimized for automotive dynamic lighting applications (interior, exterior, smart surface etc.). The basic purpose of AS1163 is to drive 9 LEDs organized in 3 channel triplets (RGB) or simply 9 single-color LEDs with an independent PWM dimming dynamic range up to 16 bits. AS1163 is often addressed with a different name: “SAID”, an acronym which stands for Stand-Alone Intelligent Driver. A daisy chain configuration of multiple AS1163 devices will enable cost effective implementation of complex dynamic lighting effects. AS1163 supports single layer slim PCB designs.The communication protocol supported by AS1163 (OSP: Open System Protocol) is fully compatible with the ams OSRAM OSIRE E3731i. AS1163 will support additional features such as I²C gateway, parallel connection, power-rail feedback, analog readout. Each AS1163 device in the chain will be usable by the MCU to read and write an external I²C device, e.g. EEPROM, temperature sensor, Ambient Light Sensor.

This device is especially designed for automotive interior applications requesting high dynamic RGB lighting scenarios. This device is an intelligent RGB device, incorporating besides R/G/B LEDs an IC from ams OSRAM. This embedded IC integrates the drivers for the three R/G/B LEDs. The embedded IC includes the optical measurement data of the three R/G/B LEDs as well. An external micro controller can address and control each device in a daisy chain architecture via an open system protocol. The open protocol allows the micro controller to read back these data and to run any color algorithm. It also allows to read back a temperature value to optimize this color algorithm. OSIRE TM E3731i is compliant with all known patents and rights in countries with an automotive production footprint. In particular, neither rights in terms of temperature compensation within the LED nor SPI communication with controllers inside an LED are affected.

The ams OSRAM OSIRE KRTB AELPS1.32 RGB sidelooker device is specifically designed for automotive interior applications. It offers individually addressable LED chips for a maximum of flexibility in terms of color point, driver selection and interconnection. Due to the low profile, the OSIRE KRTB AELPS1.32 is ideally suited for coupling into thin lightguides and enables ultra compact designs.

The OSIRE E3323 is designed for automotive ambient applications. With its compact size, the device offers a maximum of flexibility for various assembly situations. All measurement data of every single LED is made available at 10 and 50 mA via an imprinted data matrix code. This feature helps to reduce the optical measurement effort on customer side.

Silicon Photodiode with Vλ Characteristic

The AS8579 is a capacitive sensor that detects the change of capacity in different applications. The capacitive sensor measures the impedance that originates between a conducting surface (metallic object) and a human being. The IC captures the current of a metal object and applies algorithms to determine the capacitive and resistive information. The outcome information can be read through a SPI Interface that can be also used for IC configuration. This high precision performance sensor also supports a multitude of diagnostic features that meet standard functional safety requirements. The capacitive sensing IC is specifically designed to function in an electro-magnetic environment (EMC) with high magnetic disturbances. This allows the sensor to distinguish in a hands-on application if the driver‘s hand is on the steering wheel or not. The AS8579 is available in an SSOP24 package and operates at a supply voltage of 5V.