ams NanEyeM Miniature Camera Modules
×
×

설명

NanEyeM is a miniature sized image sensor for vision applications where size is a critical factor. The ability of the camera head to drive a signal through long cables makes this the ideal component for minimal diameter endoscopes.
With a footprint of a just 1 mm², it features a 320x320 resolution with a high sensitive 2.4-micron rolling shutter pixel, with large full well capacitance. The sensor has been specially designed for medical endoscopic applications where high SNR is mandatory. The sensor has a high frame rate of about 49 fps to permit SNR enhancement and a smooth, low delay display over a wide range of standard interfaces. Additionally, the frame rate can be set as low as 4 fps for use of extended exposure time and lower power consumption.
The sensor includes a 10-bit ADC and a bit serial LVDS data interface. The sensor is able to drive the signal through a cable length of up to 3 m.
The data line is semi duplex, such that configuration can be communicated to the sensor in the frame brake.
데이터시트
NanEyeM Miniature Camera Module
영어
다운로드
사용 설명서 선택 & 주문
문의 지원

세부 정보

조건

Resolution
0.1 MP
Shutter type
Rolling
Frame rate
max.
49 fps
Optical format
1/15"
Dynamic range
60 dB
Pixel pitch
2.4 µm
2.4 µm
Function
miniature camera
CRA
No
Package
Cabled Module
Package dimension
h
2.77 mm
l
1.05 mm
w
1.05 mm
CFA option
RGB
ADC mode
10 bit
Channels
output
1
Interface
output
Low-voltage differential signaling
Single Ended Interface Mode
Output interface speed
63 Mbps

주문 정보

제품 유형 설명 주문 코드 재고 여부
NEM_RGB_2.5M_FOV120_F4.0 RGB | Lens - FOV120 & F#4.0 | Cabled module with 2.5 m Q65114A3384 생산 전
NEM_RGB_2M_FOV120_F4.0 RGB | Lens - FOV120 & F#4.0 | Cabled module with 2 m Q65114A3383 생산 전

다운로드

관련 보드, 키트 & 액세서리

ams NANO-FIB-BOX_EVM_MO Evaluation kit

NanEye Fiber Optic Box Demo Kit 2.0 is a fully embedded all-in-one image processing unit that interfaces the NanEye™ micro camera head signals and provides an output of 1080p/60 format HDMI video signal, which can be directly plugged to a HDMI compatible monitor. No additional PC or image processing is required. The Demo Kit embeds advanced image processing algorithms to automatic control exposure and gain settings, constructs the color data from the raw binary stream and displays an output image of 750 x 750 pixels over an HDMI interface. The USB3 interface allows the connection to the NanEye Viewer software, running on a PC to get access to the sensor’s raw images and control settings, as well as apply image processing algorithms integrated in the NanEye Viewer. The unit is supplied by a 12 V wall charger and provides galvanic isolation to the camera head. It can interface to any standard monitor with HDMI input. The main body of the Demo Kit measures only 17 cm x 17 cm x 5.6 cm and provides all necessary video processing.
세부정보 및 데이터시트

ams NANEYEM_PARTNER_CITROBITS_VIDEOBRIDGE Evaluation board

Generic video bridge by partner Citrobits for interfacing NanEyeM and derivatives of ams OSRAM micro-cameras into customer / ISP specific system architectures. Supported interfaces of choice are: - CSI-2, MIPI Camera Serial Interface 2 - LVDS, Serial low-voltage differential signaling - CPI, Camera Parallel Interface has context menu Link to external partner website: https://citrobits.com/showroom/endoscopic-sensor-bridging/
세부정보 및 데이터시트

ams NANEYEM_PARTNER_IKEGAMI_ENDOSCOPEKIT Reference design kit

Based on NanEyeM miniature camera module our partner Ikegami developed a high end video processing system for medical and industrial endoscopic applications. The reference design kit consists of the NanEyeM miniature camera, a generic interface adapter and Ikegami’s video post-processing engine, consisting of processing hardware and advanced image processing algorithms.
세부정보 및 데이터시트

제품 선택기

원하는 제품을 찾으세요.
제품 선택기

자세히 CMOS 이미지 센서

혁신적인 소형 폼 팩터, 고감도 및 전력 효율 CMOS 이미지 센서입니다.

더 보기 CMOS 이미지 센서