ams AS5116_SO_EVM_SN Evaluation kit
×
×
Bestellnummern
| Produkt-Typ | Beschreibung | Bestellnummer | Verfügbarkeit |
|---|---|---|---|
| AS5116-SO_EK_ST | Adapter board assembled with AS5116 per default | Q65114A1516 |
Status Information
volle Produktion
Vorserie
Nicht für neues Design geplant
Bestellung und Versand sind noch möglich
Ausgelaufen
Wenn Sie auf diese Schaltfläche klicken, werden Sie auf die Seite unseres Logistikpartners Mouser Electronics weitergeleitet, wo Sie Ihren Einkauf abschließen können. Ihre Zahlungs- und Bestelldaten, die Sie zu diesem Zweck angeben, werden zwischen Mouser Electronics und ams OSRAM ausgetauscht. Weitere Einzelheiten zur Datenverarbeitung finden Sie in der Datenschutzerklärung des Mouser Shops.
|
Downloads
Benutzeranleitungen
User guide
Bilder
Images
Zugehörige Boards, Kits und Zubehör
ams SD4Y-PROGRAMMER_EVM_AC Evaluation accessory
The SD4Y Programmer is an in-system programming tool which is applicable for production environment. The SD4Y programmer supports: digital writing and reading; OTP programming and analog read back for the OTP verification. Additional the SD4Y programmer can use the AMS programming boards.
The GUI and the Labview source code are available. Additional code samples for C; C++ and C# are available.
Download latest software (UProg_SW_package_2v0.zip,
264MB)
ams USB-I-P-BOX_EVM_AC Evaluation accessory
The USB Interface & Programmer Box is an universal evaluation tool for magnetic position sensors with I2C or SPI interface. It comes with a 10-way cable to connect to a supported product on an existing board. The I2C or SPI wires are used for the communication (3.3V mode) and additionally the sensor can be powered from the USB I&P Box. By using the USB I&P Box Software, it is possible to read out the sensor data, write a configuration and to permanently program a configuration.
Hardware and Software requirements: PC with Windows 7 or later and a USB-A port
ams AS5116_SO_EVM_SB Evaluation board
The AS5116-SO_EK_SB socket board is used for quick programming of the AS5116 magnetic rotary position sensors without soldering due to its ZIF socket. This board is used in combination with the USB I&P Box or the SD4Y production programmer. The PCB offers 2 connecting options: The 5-pin dual-row connector on the left side for connecting to the USB I&P Box and the 10-pin dual-row connector on the right side for connecting to the SD4Y Production Programmer. Furthermore, 8-pin header on top gives access to analog signals and GND signals. A ZIF Open-Top-Socket for SOIC8 packages is mounted in the middle. Pin 1 of the IC is indicated by a small dot on the left bottom corner of the socket or by the label on the PCB. All passive components needed for proper operation are included on the PCB. Only a power supply mode of 5 V is possible.
ams AS5116_SO_EVM_AB Evaluation board
The AS5116 Adapter Board is a small PCB allowing simple and quick testing or evaluation of the AS5116 magnetic position sensor without the need to build a test fixture or design an own PCB. The PCB can be connected either to an external microcontroller or to the USB
I&P Box.The connector, 2x5 pin header (not populated), is included to this kit and is required for power supply as well as UART and analog interface.
Produkt Selektor
Finden Sie das richtige Produkt.