ams AS5850A Digital X-ray Flat Panel Readout IC

×

설명

The AS5850A is a 16-bit, 256-channel low-noise charge-to-digital converter designed for use in digital X-ray systems. The high degree of programmability enables system performance optimization in a wide range of applications. The combination of fast speed, low noise and low power consumption maximizes the image quality and minimizes patient dose, exposure whilst improving the time to market.
Each channel front-end consists of a charge sensitive amplifier (CSA) and a correlated double sampler (CDS), that removes offset and flicker noise from the signal, which is then converted to digital. A fast and reliable LVDS interface transmits the output digital data off-chip. Built-in diagnostic functionalities enable error detection in the signal chain. Voltage references and a temperature sensor are included on the chip. An SPI interface allows easy programming of the device parameters.
Four different power modes allow the user to minimize the current consumption for the chosen speed. Line times of 20, 28.5, 40 and 80 μs require as little as 3.1, 2.6, 1.6 and 1.1 mW per channel respectively. A special ADC operation mode is also available, that decreases the minimum line time to 15 μs without increasing the power consumption. Additionally, it is possible to add together the charges in pairs of adjacent channels; with this binning, the fastest achievable line time is 10 μs.

세부 정보

조건

Channels
input
256
Integration time
min.
15 µs
Input related noise
500
Power consumption per channel
min.
3.1 mW
Resolution
16 bit
Package
chip-on-flex
Function
x-ray sensing

다운로드

데이터시트

Short datasheet

기술 문서

환경 문서

이미지