Details
Features
- Line times down to 40 µs
- Binning mode (half the number of effective channels) for faster readout speed down to 20 µs
- Selectable parameters: input charge range, holes or electrons polarity, detector timing, low-pass filter time constant and line time
- Up to three different internal charge pump cycles for offset adjusting, signal emulation and switch charge injection compensation
- Two power modes in addition to sleep and full power-down modes
- Correlated Double Sampling for offset subtraction with programmable time constant
Benefits
- Flexible programming options to optimize for application needs
- Suitable to a wide range of detector sizes, supporting line capacitances up to 200 pF
- Best-in-class figure of merit for noise, power consumption and speed
- High-speed for dynamic applications
- Ultra-low power for portable applications
- Low-noise for great image quality
- Accurate temperature feedback
- Chip-on-flex packaging suitable to ACF bonding on the detector side and to a low-cost standard connector on the PCB side
Downloads
Datasheets
Short datasheet
Technical documents
Factsheet
Environmental documents
RoHS certificate
Related Products
ams AS5850B Digital X-ray Flat Panel Readout IC
The AS5850B is a 16-bit, 256-channel low-noise charge-to-digital converter designed for use in digital X-ray systems. The high degree of programmability enables system performance optimization in a wide range of applications. The combination of fast speed, low noise and low power consumption maximizes the image quality and minimizes patient dose, exposure whilst improving the time to market.Each channel front-end consists of a charge sensitive amplifier (CSA) and a correlated double sampler (CDS), that removes offset and flicker noise from the signal, which is then converted to digital. A fast and reliable LVDS interface transmits the output digital data off-chip. Built-in diagnostic functionalities enable to locate the source of errors in the signal chain from the detector to the data acquisition system. Voltage references and a temperature sensor are included on the chip. An SPI interface allows easy programming of the device parameters.Four different power modes allow the user to minimize the current consumption for the chosen speed. Line times of 20, 28.5, 40 and 80 μs require as little as 3.1, 2.6, 1.6 and 1.1 mW per channel respectively. A special ADC operation mode is also available, that decreases the minimum line time to 15 μs without increasing the power consumption. Additionally, it is possible to add together the charges in pairs of adjacent channels; with this binning, the fastest achievable line time is 10 μs.
ams AS5852B Digital X-ray Flat Panel Readout IC
The AS5852B is a 16-bit, 256-channel low-noise charge-to-digital converter designed for use in digital X-ray systems. The high degree of programmability enables system performance optimization in a wide range of applications. The combination of fast speed, low noise and low power consumption maximizes the image quality and minimizes patient dose, exposure whilst improving the time to market.Each channel front-end consists of a charge sensitive amplifier (CSA) and a correlated double sampler (CDS), that removes offset and flicker noise from the signal, which is then converted to digital. A fast and reliable LVDS interface transmits the output digital data off-chip. Built-in diagnostic functionalities enable to locate the source of errors in the signal chain from the detector to the data acquisition system. Voltage references and a temperature sensor are included on the chip. An SPI interface allows easy programming of the device parameters.A line time of 80 μs requires as little as 1.1 mW per channel. Additionally, it is possible to add together the charges in pairs of adjacent channels; with this binning, the fastest achievable line time is 40 μs.
Product selector
Find the right product.
More x-ray sensors
Best-in-class sensing solutions enable x-ray equipment to render more accurate images with better contrast while limiting noise and distortion.