The AS7261 integrates Gaussian interference filter technology to enable chromatic white color sensor which provides direct XYZ color coordinates consistent with the CIE 1931 2° standard observer color coordinates. Additional mapping of XYZ coordinates to the x, y (Y) of the 2-dimensional color gamut and scales of the CIE 1976 u’v’ coordinate system, providing accurate correlated color temperature (CCT) measurements and color point deviation from the black body curve for white light color in the ∆u’v’ coordinate system. A near-IR channel and LED drivers with programmable currents increase application flexibility, including support for electronic shutter applications.
Control and spectral data access is implemented either through either the I²C virtual register set, or via the serial UART enabling use of the high level smart spectral command set.
The AS7261N provides direct XYZ sensor data which conforms to the tri-stimulus standard observer color response of the human eye. A near-IR channel and LED drivers with programmable currents increase application flexibility, including support for electronic shutter applications.The AS7261N integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technology and is packaged in an LGA package that provides a built in aperture to control the light entering the sensor array. Control and spectral data access is implemented through an I²C register set.
ams AS7262 Consumer Grade Smart 6-Channel VIS Sensor
The AS7262 is a cost-effective multispectral sensor-on-chip solution designed to address spectral ID applications. This highly integrated device delivers 6-channel multispectral sensing in the visible wavelengths from approximately 430nm to 670nm with full-width half-max (FWHM) of 40nm. An integrated LED driver with programmable current is provided for electronic shutter applications. The AS7262 integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technology and is packaged in a LGA package that provides a built in aperture to control the light entering the sensor array. Control and spectral data access is implemented through either the I²C register set, or with a high level AT spectral command set via a serial UART.
The device features advanced digital ambient light sensing (ALS) and CIE 1931 tristimulus color sensing (XYZ). Each of the channels has a filter to control its optical response, which allows the device to accurately measure ambient light and sense color. These measurements are used to calculate chromaticity, illuminance and color temperature, all of which are used to support various potential applications. The TCS3430 is ideally suited for use in smartphone applications to improve color measurement and intensity of ambient light conditions. The sensor can also be used to assist the smartphone camera sensor with color sensing of ambient light to enhance and improve picture white balance to deliver more realistic and vibrant images.
The AS73211 is a digital XYZ sensor with I2C interface for relative and absolute color measurement and control. The combination of True Color XYZ sensitized photodiodes with a filter function based on the standard CIE 1931/DIN 5033 (human eye perception) and used interference filter technology as leading and most accurate technology of three-range sensors makes the AS73211 more accurate than RGB sensors and guarantee this function without spectral changings over lifetime. The AS73211 is designed with a high dynamic range to measure any light in the visible range (VIS) in environments from sunlight to dark rooms, dimmed LEDs, or dark colored monitors.